Project Description
Lead Lined Biological Safety Cabinet
Lead Lined microbiological safety cabinet for high energy isotopes dose preparation (such as 131I and positron emitter isotopes).
- Dimensions: 1380 (4 ft) x 775 x 2250 mm (including the support stand)
- Internal working surface dimensions: 1259 x 605 mm
- Other available dimensions 3 ft and 4 ft
- Manufactured in stainless steel
- Ventilations: Class II A2 Type, complying with EN 12469:30% of the air in plenum is exhausted through theHEPA/ULPA filter, the remaining 70% of the air is passed through the down flow HEPA/ULPA filter and into the work area as a vertical laminar flow air to create ISO Class 3 work surface and prevents cross contamination.
- Ventilation option:
- Class 1 Biological Safety Cabinet is available (100% extraction).
- UV Light
- Fluorescent lighting
- Shielding
- The cabinet is shielded with 30mm of lead on the base and perimeter up to a height of 940mm from the table top (1840mm from the floor).
- Provides a sliding screen made of lead glass 63mm thick (density ≥5.05 g/cm3) equivalent to 18mm of lead. The screen slides along and inside the cabinet.
- Accesories
- Additional shielded screens
- Container for dose calibrator
- Dose calibrator integrated.
- Waste container
- Generator container
- Carbon Active Filter Trap
- Radiation detector located in the exhaust with remote reading.
- Supporting bench:
- Manufactured in stainless steel
- 4ft cabinet supporting bench dimensions (WxDxH): 1380x775x900mm
Lead Lined microbiological safety cabinet for 99mTc radiolabelling and dose preparation
- Dimensions: 1380 (4 ft) x 775 x 2250 mm (including the support stand)
- Internal working surface dimensions: 1259 x 605 mm
- Other available dimensions 3 ft and 4 ft
- Manufactured in stainless steel
- Ventilations: Class II A2 Type, complying with EN 12469:30% of the air in plenum is exhausted through theHEPA/ULPA filter, the remaining 70% of the air is passed through the down flow HEPA/ULPA filter and into the work area as a vertical laminar flow air to create ISO Class 3 work surface and prevents cross contamination.
- Ventilation option:
- Class 1 Biological Safety Cabinet is available (100% extraction).
- UV Light
- Fluorescent lighting
- Shielding
- The cabinet is shielded with 6 mm of lead on the base and perimeter up to a height of 940mm from the table top (1840mm from the floor).
- Provides a sliding screen made of lead glass 21mm thick (density ≥5.05 g/cm3) equivalent to 6mm of lead. The screen slides along and inside the cabinet.
- Accesories
- Container for dose calibrator
- Dose calibrator integrated.
- Waste container
- Centrifuge integrated
- Carbon Active Filter Trap
- Supporting bench:
- Manufactured in stainless steel
- 4ft cabinet supporting bench dimensions (WxDxH): 1380 x 775 x 900 mm
Lead Lined isolator for dose preparation.
- Dimensions: 1300x860x2510mm (including the support stand)
- Hatch dimensions: 1300x860x2510mm (including the support stand)
- Manufactured in stainless steel
- Ventilations: Class III Type, complying with EN 12469. Laminar flow and negative pressure of 50Pa.
- Fluorescent lighting
- Shielding:
- The cabinet is shielded with 6 mm of lead on the base and perimeter up to a height of 940mm from the table top (1840mm from the floor).
- Provides a sliding screen made of lead glass 21mm thick (density ≥5.05 g/cm3) equivalent to 6mm of lead. The screen slides along and inside the cabinet.
- Accesories:
- Double Hatch
- Power socket
- UV Light
- Container for dose calibrator
- Dose calibrator integrated.
- Centrifuge integrated
- Supporting bench:
- Manufactured in stainless steel
- Dimensions: 1300x860x900mm
